Legrand Adorne & Radiant Switches and Dimmers Guide
Upgrading your old switches to something modern and refined? The Adorne and Radiant collections by Legrand are perfect choices for a sleek, elevated look (plus, they’re super easy to install yourself). So whether you're replacing a basic toggle or adding a dimmer, we’ll walk you through every step from planning to installing.
1. Explore the Adorne and Radiant Systems
We carry both the Adorne and Radiant collections by Legrand on our site. Explore a wide range of dimmers and switches designed to suit every style and lighting need.
The Adorne Collection is especially recognized for its iconic square shape and modern aesthetic, offering a unique alternative to traditional devices.
Shop Legrand Adorne | Shop Legrand Radiant
2. Plan Your Custom Design with the Legrand Adorne® and Radiant® Design Studio™
Thinking of making the switch to Legrand? Whether you're working on a project or simply considering an upgrade, you can visualize, plan, and customize your switches, outlets, and dimmers using the Design Studio™.
With the Design Studio™, you can:
- Mix and Match: Choose your wall plate style, then select from dimmers, switches, outlets, USB chargers, night lights, and smart controls to see exactly how everything will look together.
- Customize the Design: Choose your wall colour or upload a photo of your wall to visualize the final result in your space.
- Organize by Room: If you're working on a renovation or new build, you can organize your configurations by project and room.
-
Get Fast and Accurate Quotes: Once you’re happy with your design, save and share the link with our team for a fast and accurate quote.
Click here or visit the Design Studio™ to start customizing your switches today.
3. Install Your New Switches
Once you've received your switches, you can install them easily. Even if it's your first time working with electrical installation, we’ve broken down the official installation video into simple, clear step-by-step instructions so you can confidently tackle the project at home.
Take a look at the official Adorne Installation Video and our simple step-by-step guide below:
Simple Step-by-Step Guide
Tools you'll need: Flathead screwdriver, Phillips screwdriver & wire strippers.
Step 1: Turn Off Power
Cut power at the circuit breaker before doing anything. Test the switch to confirm it’s off.
Step 2: Remove the Existing Switch
Unscrew the cover and switch. Pull it out gently to expose the wiring behind it.
Step 3: Install the Adorne Metal Support Frame
Place the included metal frame over your electrical box and screw it in securely. This will support both your new device and the wall plate.
Step 4: Identify Your Wires
You’ll typically find:
-
Black (Hot): Carries current from the power source
-
White (Neutral): Returns current to complete the circuit
-
Bare Copper or Green (Ground): Safety ground wire
In a single-pole switch, you’ll usually have one hot wire and one load wire (going to the light). A dimmer may also require a neutral wire, so be sure to check your device’s label.
Step 5: Strip the Wires
Using your wire stripper, trim the insulation off the ends of each wire (usually about ½ inch). Most Legrand switches include a gauge to help you strip the correct amount.
Step 6: Connect the Wires to the Device
-
Ground: Connect the ground wire (bare copper or green) to the green terminal on the switch. Tighten the screw securely.
-
Hot: Insert the black (hot) wire into the terminal labeled "HOT" and tighten the screw.
-
Load/Neutral: Insert the white wire (if applicable) into the terminal marked “LOAD” or “NEUTRAL” based on your device.
-
For 3-way switches or dimmers, additional terminals may be labeled “Traveler.” Be sure to match wiring based on your old switch or consult the installation manual.
Optional: Use electrical tape to wrap the terminals once they’re connected for extra safety.
Step 5: Snap in the Switch or Dimmer
Line up the device with the frame and press it in until it clicks securely into place.
Step 6: Attach the Wall Plate
Align the wall plate with the frame and press until it snaps in on all sides. No screws required.
Step 7: Restore Power and Test
Flip your breaker back on. Test the switch to make sure everything is working properly, including dimming functionality if applicable.
And just like that, your Legrand switch/dimmer is installed!
-
The Adorne and Radiant systems are designed to bring both form and function to your walls. With no special tools and a straightforward installation process, these designer switches and dimmers are an easy weekend upgrade that makes a big impact.
Need help choosing the right Adorne or Radiant model for your space? Get in touch with our experts, we’re happy to help you!